STC 28
Standard energy-efficient dual-pane
100 units of street noise get through
- Busy street outside (≈75 dB)≈47 dB insidelike a busy office hum
- Neighbors talking outsideYou can make out words
Quieter windows · Dallas–Fort Worth
What “soundproof” really means, which glass blocks the most noise for the money, and why triple pane isn’t the answer most people think it is.
Typical ranges from glass and window makers’ published tests. Exact ratings depend on the window, size and glass package.
Why 9 points is a big deal
A standard energy-efficient window, two ⅛-inch panes of Low-E glass, rates about STC 28. Sound ratings use decibels, a sliding scale, so those 9 points cut the sound energy that gets through by nearly 90%, and to your ear it sounds about half as loud.
STC 28
Standard energy-efficient dual-pane
100 units of street noise get through
STC 37
9 mil laminated, “soundproof”
About 13 units get through, an 87% cut
Rough, rounded examples to show scale. Real results depend on the noise, the window size and the wall around it.
STC 25–30
Today’s dual-pane Low-E windows already cut noise compared with old single-pane or leaky windows, mostly by sealing air gaps.
CostIncluded
Low-to-mid 30s
One pane is thicker than the other, so each pane blocks a different range of sound. Quieter than most standard replacement windows.
CostLittle or no added cost
STC 37
Not just any laminated glass: it takes a 9 mil laminated layer. The 3 or 6 mil laminates in most laminated windows won’t get you there. At about STC 37 the window blocks roughly as much as a typical brick-veneer wall.
CostCan add a lot, sometimes close to double
“Soundproof” is a matter of perspective. No window makes a room silent, and a window is only one part of the wall. In our trade, a soundproof window is one that blocks about as much sound as the brick wall around it: roughly STC 37. There’s little reason to install a window that’s quieter than its wall, because the noise simply comes through the wall instead.
STC is measured in decibels, which is a sliding scale, not a straight count. Ten points sounds small, but every 10 points cuts the sound energy coming through by about 90%, and your ear hears it as roughly half as loud. That’s why moving from a standard energy-efficient window near STC 28 to a 9 mil laminated window near STC 37 changes a room so much: for every 8 units of noise the standard window lets in, the soundproof window lets in about one.
STC (Sound Transmission Class) is the rating most window makers publish. It is weighted toward voices and mid-range sound. OITC (Outdoor-Indoor Transmission Class) is weighted toward the low rumble of traffic, trucks and aircraft. If a busy road is your problem and a maker publishes OITC, that number is the better guide.
A standard dual-pane window uses two panes of the same thickness. Dissimilar glass, also called offset glass, makes one pane thicker than the other. Each pane stops a different range of sound frequencies, so together they let less noise through. It’s quieter than most energy-efficient replacement windows, for little or no added cost.
Laminated glass has a clear, sound-damping layer bonded between two sheets of glass, like a car windshield. That layer soaks up vibration and makes the glass harder to break through.
Not all laminated glass is soundproof. To reach about STC 37, the laminated layer needs to be 9 mil. Most laminated windows use a 3 or 6 mil layer, which adds safety but won’t make a meaningful difference to noise. If a quote just says “laminated,” ask how thick the layer is.
The trade-off is price: 9 mil laminated glass can add a lot, sometimes close to double the cost of the window.
It’s natural to assume three panes are quieter than two. For energy, a third pane helps. For noise, the gain is small: equal-thickness panes vibrate alike, and the air gaps are narrower. A dual-pane window with dissimilar glass often matches a triple-pane window for noise, at a lower price.
Where air gets through, sound gets through. A well-sealed frame, good weatherstripping and a careful installation with gaps fully sealed and insulated matter as much as the glass. That’s part of every window we install.
Many brands we install, including Simonton, Alside and Vistamark, can be built with sound-control glass. Your written estimate lists the glass package for every window, so you can choose where the upgrade is worth it.
No window makes a room silent, so “soundproof” is relative. We use it for a window that blocks about as much outside noise as a typical brick-veneer wall, around STC 37. That takes 9 mil laminated glass; the thinner 3 or 6 mil laminates in most laminated windows won’t reach it.
Most dual-pane replacement windows rate about STC 25 to 30. Dissimilar glass moves a window into the low-to-mid 30s, and 9 mil laminated glass reaches about STC 37.
Usually not by much. Triple pane costs more and is mainly an energy upgrade. For noise, dual-pane dissimilar glass often performs as well, and 9 mil laminated glass performs better.
A dual-pane glass unit where one pane is thicker than the other. Each pane blocks a different range of sound frequencies, so together they let less noise through, for little or no added cost.
Dissimilar glass adds little or nothing. 9 mil laminated glass, needed to reach about STC 37, can add a lot, sometimes close to double the window price. Many homeowners upgrade only the windows that face the noise.
Many of the brands we install, including Simonton, Alside and Vistamark, can be built with sound-control glass. Your estimate lists the exact glass package and rating for each window.
Yes. A standard energy-efficient window rates about STC 28. STC is a decibel scale, so going to STC 37 cuts the sound energy coming through by nearly 90% and makes outside noise sound about half as loud.
STC is the most common sound rating and is weighted toward voices and mid-range sound. OITC is weighted toward low-frequency outdoor noise such as traffic, trucks and aircraft. Where a maker publishes both, OITC is the better guide for road noise.
Home Window Guy is an AdEx company. For everything else on your home, call AdEx Home Solutions.
Call AdEx 214-349-7283 Visit adexhomesolutions.com →Send a few photos and get the brand, series and color for every window within 24 hours.
Get My Free Window EstimateCall 214-945-8708